We carry a robust selection of Network accessories that compliment and round-out any CCTV or Wi-Fi Network deployment from PoE switches to Ethernet Extenders we have everything you need.
If you have any specific requirements and cannot find the accessory to suit your applications please email us so we can assist you.
Showing all 11 results
-
2N 9159014 – Ethernet to 2 wire converter / adaptor
$600.60Quick ViewThe 2N® 2Wire convertor allows you to use existing two-wire or coaxial cabling from your original door bell or door intercom to connect any IP equipment.
No configuration is required, and you only need one 2N® 2Wire unit at each end of the cable, where at least one of them is connected to a power source. The 2N® 2Wire unit then provides PoE power not only to the second converter, but also to all other connected IP equipment.
- Utilisation of existing infrastructure
- Single cable for power and data transfer
- Power for connected IP devices over PoE up to a range of 220m
- Simple, fast installation
- Robust Aluminum houing
- High reliability
-
AC/DC Power Supply Adapter
$17.00Quick View- Input 100-240V AC
- Output 12V DC 1000mA
- Regulated output voltage for Intercoms, Phones, Speakers, CCTV etc.
-
DOORBIRD ETHERNET TO 2 WIRE CONVERTER
$495.00Quick ViewThe Doorbird 2 wire converter will convert your Ethernets POE signal to be used with a 2 wire system, such as an existing door chime wiring, and convert it back again to allow connection to your Doorbird Intercom.
Have trouble running a cat 5e or 6 cable to your intercom? Dont have a Wifi signal reliable enough at the Intercom installation location? No problem, utilise your existing electric strike or doorbell wiring to both power and transmit data to your intercom.
The Converter supports both af and at modes of POE, allowing up to 30w to be used to power all matter of devices, such as cameras and intercoms.
Note: POE injector/switch is not included or part of this product.
-
Ivsec IP to 2Wire Converter Kit
$286.00Quick View- Transmit IP signals over standard 2-core or coaxial cable
- Integrate IP devices (such as IP cameras, IP intercom, etc) into an existing non-LAN cable infrastructure
- Transmits data and power over single cable
- Supplies power for connected IP devices via PoE
- Simple, fast installation
- Low cost device, cost saving on cable installation
- Coax to 2 wire connectors included.
-
Milesight A62 / A63 Junction box for Bullet Cameras
Quick ViewA62 Junction Box
Weight: 510g
Dimension: 134*127*40mm
Installation Environment: For the containing of electrical connections which need to be concealed from sight and deter tampering
Applicable Model: Pro Bullet, Mini PTZ Bullet
A63 Junction Box
Weight: 620g
Dimension: 134*127*40mm
Installation Environment: For the containing of electrical connections which need to be concealed from sight and deter tampering
Applicable Model: Mini Bullet, Motorized Mini Bullet, Vandal-proof Motorized Mini Bullet
Please contact us for prices
-
Milesight MS-A71 Wallmount Bracket for mini domes
Quick ViewA71 Wall Mount
Weight: 530g
Dimension: 162*124*78mm
Installation Environment: Used to install cameras on an wall or vertical structure
Applicable Models: Mini Dome, IR Mini Dome, Vandal-proof Mini Dome, Weather-proof Mini Dome, AF Motorized Mini Dome
Please contact us for prices
-
RECORDING HARD DISK DRIVES FOR NETWORK VIDEO RECORDER
Quick ViewSurveillance hard drives are a central component in the recording and storage of surveillance video, they are designed to work 24 hours a day & 7 days week.
The number of drives and the maximum recording capacity permitted for each NVR depends on the models, Please check the NVR datasheets to confirm the same.
The below table shows the NVR models we sell with the corresponding number of drives supported and maximum data capacity permitted on each drive .
MS N1009 – Supports 1 x HDD (maximum data capacity of each drive upto 10 TB )
MS N5000 – Supports 2 x HDD (maximum data capacity of each drive upto 10 TB )
Uniview NVR 301 – Supports 1 x HDD (maximum data capacity of each drive upto 8 TB )
Uniview NVR 302 – Supports 2 x HDD (maximum data capacity of each drive upto 10 TB )
Please contact us for price
-
Tenda -TEF1105P-4-63W , 5 port PoE switch
$69.00Quick ViewFast Ethernet PoE switch comes with 4 PoE ports + 1 uplink port. The switch enables users to use all the PoE ports to connect PoE powered devices without wasting any PoE ports for uplink.
- Auto Detects Powered Devices
- Plug and Play no configuration required
- 802.3af / at PoE power compliant
- IEEE 802.3af /at power on up to 4 ports
- 4 x 10/100 Mbps PoE Ports + 1 uplink port
- Supports PoE power up to 30W for each PoE port
- 6KV lightning protection
- Upto 250 meters long distance transmission
- LED indicators for monitoring power, link, activity and speed
- Desktop metal case with 63W external power supply
-
Tenda 1109P- 9 port Fast Ethernet Switch with 8 PoE ports
$134.00Quick ViewFast Ethernet PoE switch comes with 8 PoE ports + 1 uplink port. The switch enables users to use all the PoE ports to connect PoE powered devices without wasting any PoE ports for uplink.
- Auto Detects Powered Devices
- Plug and Play no configuration required
- 802.3af / at PoE power compliant
- IEEE 802.3af /at power on up to 8 ports
- 8 x 10/100 Mbps PoE Ports + 1 uplink port
- Supports PoE power up to 30W for each PoE port
- 6KV lightning protection
- Supports Simple Port VLAN setup
- Smart Power Management
- LED indicators for monitoring power, link, activity and speed
- Large Buffer design for smooth performance
- Desktop metal case with 102W external power supply
-
Tenda PoE 30G-AT, Gigabit PoE injector delivers 30W power upto 100 meters
$49.00Quick View- Delivers Power upto 100 meters
- Gigabit for blazing fast data transfer
- Fully IEEE 802.3 at / af compliant
- Plug and Play, no configuration required
- Easy and cost effective solution to power PoE devices
- Reduces installation costs
-
TENDA PoE15F – 10/100Mbps POE INJECTOR
$26.00Quick View- Delivers Power upto 100 meters
- Fully IEEE 802.3 af compliant
- Plug and Play, no configuration required
- Easy and cost effective solution to power PoE devices
- Reduces installation costs
