2N 9155041 – Induction Loop Module

Description

2N 9155041 – Induction Loop Module wirelessly transmits sound from the 2N IP intercom to the affected person’s hearing aid. A hearing impaired visitor to the building thus gets the benefit of voice communication. By installing the induction loop at the door you meet not only the necessary standards, but facilitate the hearing aid wearer’s communication e.g. with the reception desk.

• AUDIO TRANSMISSION TO HEARING AIDS
  Communicate with hearing impaired persons. 2N 9155041 – Induction Loop Module transmits sound to all standard hearing aids in accordance with the IEC 60118-4 standard.

• SIMPLE CONNECTION TO THE 2N IP INTERCOM
  Connect any 2N IP intercom to the induction loop. Thanks to the special-purpose connector, you won’t have to configure anything.

• BUILT-IN ANTENNA
  The induction loop has a built-in antenna, which covers the area in front of it with a signal for listening devices.

• SUITABLE FOR OUTDOOR USE
  With its IP65 standard compliance, the inductive loop is weather-resistant and therefore suitable for outdoor use.

• STANDBY MODE
  When there is no audio signal the inductive loop automatically switches to energy-saving mode.

• EASY FITTING
  2N 9155041 – Induction Loop Module easily mounts to the wall with 2 screws. You then connect one cable to the signal source and the other to the power feed.

• ARBITRARY AUDIO INPUT
  With the induction loop, you can make use of any signal source, e.g.. IP intercoms, lift communicators, etc.

• ADJUSTABLE VOLUME
  The induction loop output volume level can be adjusted to suit where you install it.

2N 9155041 – Induction Loop Module datasheet.